Directional drilling or slant drilling is the practice of drilling non-vertical bores. It can be broken down into four main groups: oilfield directional drilling, utility installation directional drilling, directional boring horizontal directional drilling - HDD , and surface in seam SIS , which horizontally intersects a vertical bore target to extract coal bed methane. Many prerequisites enabled this suite of technologies to become productive.
Probably, the first requirement was the realization that oil wells , or water wells , do not necessarily need to be vertical. This realization was quite slow, and did not really grasp the attention of the oil industry until the late s when there were several lawsuits alleging that wells drilled from a rig on one property had crossed the boundary and were penetrating a reservoir on an adjacent property.
Horizontal directional drill rigs are developing towards large-scale, micro-miniaturization, mechanical automation, hard stratum working, exceeding length and depth oriented monitored drilling. Measuring the inclination of a wellbore its deviation from the vertical is comparatively simple, requiring only a pendulum. Measuring the azimuth direction with respect to the geographic grid in which the wellbore was running from the vertical , however, was more difficult.
In certain circumstances, magnetic fields could be used, but would be influenced by metalwork used inside wellbores, as well as the metalwork used in drilling equipment. The next advance was in the modification of small gyroscopic compasses by the Sperry Corporation , which was making similar compasses for aeronautical navigation.
Sperry did this under contract to Sun Oil which was involved in a lawsuit as described above , and a spin-off company " Sperry Sun " was formed, which brand continues to this day, [ when?
